Tomtom on the O2 Flame - read setup here!
Tomtom v7 works fine for this PDA!
For Bluetooth & External GPS Connection: 1. Enable the bluetooth on the phone using Wireless Manager, turn on! 2. Turn on your GPS Unit 3. Wireless Manager > Menu > bluetooth settings > Devices > Add New Device and follow the process to pair your GPS with your Flame; when it requests, enter the PIN: 0000 4. Create Output Com Port: Wireless Manager > Menu > bluetooth settings > Com Port > New Outgoing Port then follow the process selecting your device to Com0 Now follow these quick steps to Configure GPS: Settings > System > GPS > GPS Program Port > COM8 GPS > Hardware Port > COM 2 > Baud Rate > 9600 GPS > Access > Automatically 5. On TomTom go to 'GPS Status' > Select > other Bluetooth GPS receiver > Select > Configure > COM0 Make sure you're outdoors to get a signal! Hope that helps you enjoy Tomtom! |
Re: Tomtom on the O2 Flame - read setup here!
just to point out the exact Tomtom Navigator version that works with the Flame:
v7.917.9186 Qvga |
All times are GMT. The time now is 10:00 AM. |
Powered by Global Forums ®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
vB.Sponsors
Search Engine Optimisation provided by
DragonByte SEO (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- Coded & Maintained by HarryM - Copyright 2022 -Visit: Coffee UK