Moorehead Enterprise Forums
PDA

View Full Version : XDA Flame TV Connection and Control


Jake
18th January 2013, 10:48 AM
The O
2
Xda Flame supports connection to a TV set or projector for viewing photos and videoswith others, making presentations, or to enjoy a richer console gaming experience on a larger screen.1. Connect the TV out connector to the TV out port and the audio plug into the audio jack atthe bottom of the phone.2. Connect the 3 color ends to the appropriate sockets of the TV set or Projector.3. Switch your TV to the AV channel and you will be able to see the same image as is on your O
2
Xda Flame.
Please note
Your O
2
Xda Flame could be connected to any display device which is equipped with an AV connector. (e.g. TV (NTSC only), Projector, DVD player or Setbox, and so on.)If you would like to change the display mode from portrait to landscape, you can select the screen mode from
Start
>
Settings
>
System
tab >
Screen
. Screen Orientation enables the End User to switch the orientation of the touch screen between Portrait and Landscape modes.
TV
http://htmlimg1.scribdassets.com/2s4se9mhvk5ya9b/images/194-03fe3f1244.jpg

Moorehead Website Consultancy Services